Nipple Drinker Parts with Cup Anti Leak Poultry Water Valve

The Qimao Metal Manufacturer’s Nipple Drinker Parts with Cup Anti Leak Poultry Water Valve upper part is a stainless steel nipple with a vertical push pin. The lower part is an attached plastic cup that holds about 8–10ml of water. When a bird pecks the pin upward or sideways, water flows into the cup. Any excess water stays inside the cup instead of falling to the floor.

The nipple uses a conical rubber seal. It stays closed until the pin is moved 2–3mm. The cup has a curved bottom with no sharp corners. This makes cleaning easier and prevents feed paste from getting stuck. The thread is standard 1/8" BSP, which fits most round poultry pipes (20–25mm outer diameter with an adapter or saddle clamp). No pressure regulator is strictly needed if your line pressure stays below 0.8 bar, but we still recommend one for best results.

Product Parameter (Specification)

Product Feature

• Stainless steel Nipple Drinker Parts with Cup Anti Leak Poultry Water Valve the nipple body (304 grade) — no rust inside or outside

• EPDM rubber seal — works with hard water and common farm disinfectants

• Snap-on plastic cup included — no additional purchase needed

• Cup holds drips and lets birds see standing water (visual trigger)

• Vertical pin movement — less jamming compared to side-action designs

• 1/8" BSP threaded base — fits most standard poultry drinker pipes

• Pin spring tension set for adult chickens (approx 15–20g activation force)

• Cup can be removed for cleaning without unthreading the nipple

Application

• Broiler houses with litter floors — keeps bedding dry near drinker lines

• Layer battery cages — each cup serves two adjacent birds

• Duck and goose pens — cup reduces splashing compared to open nipples

• Turkey growing sheds — higher flow than standard chicken nipples

• Backyard coop automatic water systems with small barrels (gravity feed)

• Quail breeder cages — low height clearance, cup catches fine drips

• Farm quarantine areas — easy to remove cup for bleaching between flocks

Product Details

We have made Nipple Drinker Parts with Cup Anti Leak Poultry Water Valve poultry watering parts for eleven years, mostly for Southeast Asian and South American integrators. Our factory runs two dedicated assembly lines for nipple drinkers. Every piece gets a short water flow test before packing — we check for sticking pins and slow drip leaks at 0.5 bar.

We keep finished goods in a humidity-controlled warehouse. Typical lead time for 5, 000 pieces is three working days. For larger orders (20, 000+), we need ten days. We offer two levels of quality: standard (commercial grade) and premium (extra stainless steel thickness and double-seal rubber). Both are tested for 300, 000 actuations on a mechanical pecker simulator.

We do not resell other brands. All parts are our own tooling, so replacements stay identical year to year. Customers get a one-year warranty against leaking or broken cups under normal farm use.